Please select a topic from the following
V. E. Bean, J. M. Hall and G. E. Mattingly "Preliminary Results from Interlaboratory Comparison of Air Speed Measurements Between 0.3 m/s and 15 m/s," Proc. of the 1999 NCSL Workshop and Symposium, Charlotte, NC (1999).
N. E. Mease, W. G. Cleveland, Jr.,
G. E. Mattingly, and J. M. Hall, "Air Speed Calibrations at the
National Institute of Standards and Technology," Proc. of the 1992 Measurement
Science Conference, pp. 315-326, Anaheim, CA (1992).
| |
J. D. Wright and A. N. Johnson "Uncertainty in Primary Gas Flow Standards Due to Flow Work Phenomena," Proc. of FLOMEKO 2000, Salvador, Brazil (2000).
J. D. Wright, D. B. Ward, and G. E. Mattingly "Validating uncertainty analyses for Gas flow standards via intra- and Inter-laboratory comparisons," Proc. of the 1999 NCSL Workshop and Symposium, Charlotte, NC (1999).
J. D. Wright and G. E. Mattingly "NIST Calibration Services for Gas Flow Meters: Piston Prover and Bell Prover Gas Flow Facilities," NIST Special Publication 250-49 (1998).
B. N. Taylor and C. E. Kuyatt, "Guidelines
for the Evaluating and Expressing the Uncertainty of NIST Measurement Results,"
NIST Technical Note 1297 (1994).
| |
A. N. Johnson, J. D. Wright, S. Nakao, C. L. Merkle, and M. R. Moldover, "The Effect of Vibrational Relaxation on the Discharge Coefficient of Critical Flow Venturis," Flow Measurement and Instrumentation, 11, pp. 315-327 (2000).
A. N. Johnson, P. I. Espina, G. E. Mattingly, J. D. Wright and C. L. Merkle, "Numerical Characterization of the Discharge Coefficient in Critical Nozzles," Proc. of the 1998 NCSL Workshop and Symposium, Albuquerque, NM (1998).
J. D. Wright, "The Long Term Calibration Stability
Of Critical Flow Nozzles And Laminar Flowmeters," Proc. of the 1998 NCSL
Workshop and Symposium, Albuquerque, NM (1998).
| |
| |
J. F. Swindells, J. R. Coe, Jr.,
and T. B. Godfrey, "Absolute
Viscosity of Water at 20ºC," NBS J. of Res., 48 (1),
pp. 1-31 (1952).
| |
J. D. Wright, J.-P. Kayl, A. N.
Johnson, and G. M. Kline, "Gas
Flowmeter Calibrations with the Working Gas Flow Standard," NIST
Special Publication 250-78 (2008).
A. N. Johnson and B. Johansen, "U.S.
National Standards for High Pressure Natural Gas Flow Measurement," Proc.
of the 2008 Measurement Science Conference, Anaheim, CA (2008).
A. N. Johnson and J. D. Wright, "NIST's
0.677 m3 and 26 m3 PVTt Primary Flow Standards Agree within 0.035 %," Proc.
of the 2007 Measurement Science Conference, Anaheim, CA (2007).
J. D. Wright, "Uncertainty of the
Critical Venturi Transfer Standard Used in the K6 Gas Flow Key Comparison,"
Proc. of FLOMEKO 2007, Johannesburg, South Africa (2007).
J. D. Wright, B. Mikan, R. Paton, K.-A. Park, S.-I. Nakao, K. Chahine, R. Arias,
"CIPM Key Comparison for Low-Pressure
Gas Flow: CCM.FF-K6," Metrologia, 44 (2007).
A.N. Johnson and J.D. Wright, "Revised
Uncertainty Analysis of NIST 26 m3 PVTt Flow Standard," Proc. of the
International Symposium on Fluid Flow Measurement, Queretaro, Mexico (2006).
A.N. Johnson and J.D. Wright, "Gas
Flowmeter Calibrations with the 26 m3 PVTt Standard," NIST Special Publication
250-1046 (2006).
A.N. Johnson and T. Kegel, "Uncertainty
and Traceability for the CEESI Iowa Natural Gas Facility," J. Res. Natl.
Inst. Stand. Technol., 109, pp. 345-369 (2004).
J. D. Wright "Gas Property
Equations for the NIST Fluid Flow Group Gas Flow Measurement Calibration Services,"
(Gaithersburg, MD: NIST 2004).
J. D. Wright, A. N. Johnson, M. R. Moldover, and G. M. Kline "Gas Flowmeter Calibrations with the
34 L and 677 L PVTt Standards," NIST Special Publication 250-63 (2004).
J.D. Wright, M.R. Moldover, A.N. Johnson, and A. Mizuno, "Volumetric Gas Flow Standard with Uncertainty of 0.02% to 0.05%," ASME J. of Fluids Engineering, 125, pp. 1058-1066 (2003).
A. N. Johnson, J. D. Wright, M. R. Moldover, and P. I. Espina, "Temperature Characterization in the Collection
Tank of the NIST 26 m3 PVTt Gas Flow Standard," Metrologia, 40, pp. 211-216 (2003).
J. D. Wright, "What is the “Best” Transfer
Standard for Gas Flow?,"
Proc. of the FLOMEKO 2003, Groningen, Netherlands (2003).
J. D. Wright, A. N. Johnson,
and M. R. Moldover, "Design and Uncertainty
Analysis for a PVTt Gas Flow Standard,"
NIST J. of Res., 108 (1), pp. 21-47 (2003).
J. D.
Wright and P. I. Espina, “Flow
Calibration Services at NIST,” Proc. of the ISA 46th International
Instrumentation Symposium, Seattle, WA (2000).
J. D. Wright and A. N. Johnson "Uncertainty in Primary Gas Flow Standards Due to Flow Work Phenomena," Proc. of FLOMEKO 2000, Salvador, Brazil (2000).
S. Nakao, J. D. Wright, J. Barbe, B. Niederhauser,
M. Quintilii, and D. Knopf, "Intercomparison Tests of the NRLM
Transfer Standard with the Primary Standards of NIST, BNM-LNE, OFMET and PTB
for Small Mass Flow Rates of Nitrogen Gas," Proc. of the 1999 Metrologie Conference,
Paris, France (1999).
J. D. Wright, G. E. Mattingly, S. Nakao, Y. Yokoi, and M. Takamoto, "International Comparison of a NIST Primary Standard with an NRLM Transfer Standard for Small Mass Flow Rates of Nitrogen Gas," Metrologia, 35, pp. 211-221 (1998).
J. D. Wright and G. E. Mattingly
"NIST Calibration Services for Gas
Flow Meters: Piston Prover and Bell Prover Gas Flow Facilities," NIST
Special Publication 250-49 (1998).
| |
I.I. Shinder and I.V. Marfenko, "Water
Flow Calibration Facility," NIST Special Publication 250-73
(2006).
J.J. Aguilera, T.T. Yeh, and J.D. Wright, "Inside
Diameter Measurements for the Cylinder of a 20 L Piston Prover," Proc.
of the International Symposium on Fluid Flow Measurement, Queretaro, Mexico
(2006).
I. Marfenko, T.T. Yeh, and J.D. Wright, "Diverter
Uncertainty Less Than 0.01% for Water Flow Calibrations," Proc. of the
International Symposium on Fluid Flow Measurement, Queretaro, Mexico (2006).
T.T. Yeh, J. Aguilera, and J.D. Wright, "Hydrocarbon
Liquid Flow Calibration Service," NIST Special Publication 250-1039
(2005).
T. T. Yeh, P. I. Espina, G. E. Mattingly, N. R. Briggs, and J. Aguilera, "An Uncertainty Analysis of a
NIST Hydrocarbon Liquid Flow Calibration Facility," Proc.
of HT/FED'04 2004 Heat Transfer/Fluids Engineering Summer Conference,
Charlotte, NC (2004).
V. Gowda, T. T. Yeh, P. I. Espina, and N. P. Yende, “The new NIST Water Flow Calibration
Facility,”Proc. of the FLOMEKO 2003, Groningen,
Netherlands (2003).
T. T. Yeh, N. P. Yende, and
P. I. Espina, “Theoretical
Self-Error-Canceling Diverters for Liquid Flow Calibration Facilities,” Proc. of the 2003 FLOMEKO, Groningen,
Netherlands (2003).
T. T. Yeh, N. P. Yende, A.
Johnson, and P. I. Espina, “Error
Free Liquid Flow Diverters for Calibration Facilities,” Proc. of the 2002 ASME Fluids Engineering
Division Summer Meeting, Montreal, Quebec, Canada (2002), FEDSM2002-31085.
J. D. Wright and P. I. Espina,
“Flow Calibration Services at NIST,”
Proc. of the ISA 46th International Instrumentation Symposium, Seattle,
WA (2000).
G. E. Mattingly, "The
Characterization of a Piston Displacement-Type Flowmeter Calibration Facility
and the Calibration and Use of Pulsed Output Type Flowmeters," NIST J. of Res., 97 (5), pp. 509-531
(1992).
| |
J. J. Aguilera, J. D. Wright, and V. E. Bean,
"NIST Calibration Services
for Hydrometers," NIST Special Publication 250-80 (2008).
J. J. Aguilera, J. D. Wright, and V. E. Bean, "Hydrometer
Calibration by Hydrostatic Weighing with Automated Liquid Surface Positioning,"
Meas. Sci. Technol., 19 (2008).
J. C. Hughes, "Testing of Hydrometers," NBS
Circular 555 (1954).
G. K. Burgess, "Standard Density and Volumetric Tables,"
NBS Circular 19 (1924).
| |
R. Arias, J. Wright, C. Jacques,
C. Lachance, P. Lau, H. Tobben, G. Cignolo, S. Lorefice, J. Man, and V.Y. Aibe,
"Final Report on CIPM Key Comparison
for Volume Intercomparison at 20 L and 100 mL," Bureau International des
Poids et Mesures (2006).
V.E. Bean, P.I. Espina, J.D. Wright, J.F. Houser, S.D. Sheckels, and A.N. Johnson,
"NIST Calibration Services
for Liquid Volume," NIST Special Publication 250-72 (2006).
J. M. Maldonado, R. Arias, H.-H. Oelze, V. E. Bean, J. F. Houser, C. Lachance
and C. Jacques, "International comparison of volume measurement
standards at 50 L at the CENAM (Mexico), PTB (Germany), Measurement Canada and
NIST (USA)," Metrologia, 39, pp. 91-95 (2002).
| |
S. Nakao, J. D. Wright, J. Barbe, B. Niederhauser,
M. Quintilii, and D. Knopf, "Intercomparison Tests of the NRLM
Transfer Standard with the Primary Standards of NIST, BNM-LNE, OFMET and PTB
for Small Mass Flow Rates of Nitrogen Gas," Proc. of the 1999 Metrologia Conference,
Paris, France (2003).
V. E. Bean, J. M. Hall and G. E. Mattingly, "Preliminary Results from Interlaboratory Comparison of Air Speed Measurements Between 0.3 m/s and 15 m/s," Proc. of the 1999 NCSL Workshop and Symposium, Charlotte, NC (1999).
J. D. Wright, D. B. Ward, and G. E. Mattingly, "Validating uncertainty analyses for Gas flow standards via intra- and Inter-laboratory comparisons," Proc. of the 1999 NCSL Workshop and Symposium, Charlotte, NC (1999).
J. D. Wright, G. E. Mattingly, S. Nakao, Y. Yokoi, and M. Takamoto, "International Comparison of a NIST Primary Standard with an NRLM Transfer Standard for Small Mass Flow Rates of Nitrogen Gas," Metrologia, 35, pp. 211-221 (1998).
G. E. Mattingly, "A Round Robin Flow Measurement Testing Program Using Hydrocarbon Liquids: Results of First Phase Testing," NIST IR 88-4013 (1988).
G. E. Mattingly, W. C. Pursley, R. Paton, and E. A. Spencer, "Steps Toward an Ideal Transfer Standard for Flow Measurement," Flow Measurement of Fluids, eds. H. H. Dijstelbergen and E. A. Spencer, (Amsterdam, The Netherlands: North-Holland Publishing Company) pp. 543-552 (1978).
G. E. Mattingly, P. E. Pontius, H. H. Allion, and E. F. Moore, "A Laboratory Study of Turbine Meter Uncertainty," NBS Special Publication 484, pp. 33-54 (1977).
W. J. Youden, "Statistical Aspects of the Cement Testing Program," Proc. of the Am. Soc. Testing Mats., 59, pp. 1120-1128 (1959).
W. J. Youden, "Evaluation of Chemical Analyses
on Two Rocks," Technometrics, 1 (4), pp. 409-417(1959).
| |
T. T. Yeh, P. I. Espina, and S. A. Osella, “An Intelligent Ultrasonic Flow Meter for Improved Flow Measurement and Flow Calibration Facility,” Proc. of the 19th IEEE Instrumentation and Measurement Technology Conference, Budapest, Hungary (2001), IMTC2001-3112.
G. E. Mattingly and T. T. Yeh, "NIST's Ultrasonic Technology Assessment Program to Improve Flow Measurements," NIST Technical Note -1429 (2000).
P. I. Espina, T. T. Yeh, P. I. Rothfleisch, and S. A. Osella, "Tele-Metrology and Advanced Ultrasonic Flow Metering (updated version)," Proc. of the International Conference on Metrology, pp. 137-147, Jerusalem, Israel (2000) and Proc. of FLOMEKO 2000, Salvador, Brazil (2000).
P. I. Espina, P. I. Rothfleisch, T. T. Yeh, and S. A. Osella, "Tele-Metrology and Advanced Ultrasonic Flow Metering," Proc. of the 4th International Symposium on Fluid Flow Measurement, Denver, CO (1999).
T. T. Yeh and G. E. Mattingly, "Ultrasonic Technology: Prospects for Improving Flow Measurements and Standards," Proc. of the 4th International Symposium on Fluid Flow Measurement, Denver, CO (1999) and Proc. of FLOMEKO 2000, Salvador, Brazil (2000).
T. T. Yeh and G. E. Mattingly, "Ultrasonic Flow Measurement Technology: Prospects for Transfer and Primary Standards," Proc. of FLOMEKO 1998, Lund, Sweden (1998).
J. D. Wright, "The Performance of Transit Time Flowmeters in Heated Gas Mixtures," Proc. of the 1998 ASME Fluids Engineering Division Summer Meeting, Washington, DC (1998), FEDSM98-5290.
T. T. Yeh and G. E. Mattingly "Computer
Simulations of Ultrasonic Flow Meter Performance in Ideal and Non-Ideal Pipeflows,"
Proc. of the 1997 ASME Fluids Engineering Division Summer Meeting, Vancoover,
BC (1997), FEDSM97-3012.
| |
P. I. Espina, P. I. Rothfleisch, T. T. Yeh, and S. A. Osella, "Tele-Metrology and Advanced Ultrasonic Flow Metering," Proc. of the 4th International Symposium on Fluid Flow Measurement, Denver, CO (1999).
P. I. Espina, "Flow Tele-Metrology," Proc. of the 16th IEEE Instrumentation and Measurement Technology Conference, Venice, Italy (1999).
P. I. Espina, "Tele-Calibration of Gas Flow Meters," Proc. of the 1999 Measurement Science Conference, Anaheim, CA (1999). Winner of the 1999 MSC "Best Paper Award."
P. I. Espina, "Tele-Metrology:
Remote Flowmeter Calibration," Flow Control Magazine, 5 (1), pp.
16-21 (1999).
| |
J. D. Wright, "The Performance of Transit Time Flowmeters in Heated Gas Mixtures," Proc. of the 1998 ASME Fluids Engineering Division Summer Meeting, Washington, DC (1998), FEDSM98-5290.
J. D. Wright and P. I. Espina, "Flowmeter
Calibration Facility for Heated Gas Mixtures," Proc. of the 1997 NCSL,
I, pp. 401-421, Atlanta, GA (1997).
| |
T. T. Yeh and G. E. Mattingly, "Pipeflow Downstream of a Reducer and Its Effects on Flowmeter," Flow Measurement and Instrumentation Journal, 5 (3), pp. 181-187 (1994).
T. T. Yeh and G. E. Mattingly, "Summary Report of NIST's Industry-Government Consortium Research Program on Flowmeter Installation Effects: The 45 Degree Elbow," NIST IR 1408 (1994).
G. E. Mattingly and T. T. Yeh, "Flowmeter Installation Effects Due to Sevearl Elbow Configurations," Proc. of the 2th International Symposium on Fluid Flow Measurement, pp. 271-283 (1992).
G. E. Mattingly and T. T. Yeh, "Summary Report of NIST's Industry-Government Consortium Research Program on Flowmeter Installation Effects with Emphasis on the Research Period February - December 1990: TEE, used as an Elbow Configuration," NIST IR 4753 (1992).
G. E. Mattingly and T. T. Yeh, "Effects of Pipe Elbows and Tube Bundles on Selected Types of Flowmeters," Flow Measurement and Instrumentation Journal: Installation Effects Special Issue, 2, pp.4-13 (1991).
G. E. Mattingly and T. T. Yeh, "Summary Report of NIST's Industry-Government Consortium Research Program on Flowmeter Installation Effects with Emphasis on the Research Period November 1988 - May 1989," NIST IR 4310 (1989).
G. E. Mattingly and T. T. Yeh, "NBS' Industry-Government Consortium Research Program on Flowmeter Installation Effects: Summary Report with Emphasis on Research Period January - July 1988," NIST IR 89-4080 (1989).
G. E. Mattingly and T. T. Yeh, "NBS'
Industry-Government Consortium Research Program on Flowmeter Installation Effects:
Summary Report with Emphasis on Research Period July - December 1987," NIST
IR 88-3898 (1988).
| |
P. I. Espina and U. Piomelli, "Numerical Simulation of the Gas Flow in Gas-Metal Atomizers," Proc. of the 1998 ASME Fluids Engineering Division Summer Meeting, Washington, DC (1998), FEDSM98-4901.
P. I. Espina and U. Piomelli, "Study of the Gas Jet in a Close-Coupled Gas-Metal Atomizer." AIAA Paper 98-0959.
P. I. Espina, "Study of an Underexpanded Annular Wall Jet Past an Axisymmetric Backward-Facing Step", Ph.D. Dissertation, Univ. of Maryland, College Park, MD (19970.
P. I. Espina and U. Piomelli, "A Validation of the NPARC Code in Supersonic Base Flows." AIAA Paper 97-0032.
S. A. Osella, P. I. Espina, S. D. Ridder, F. S. Biancaniello, and G. E. Mattingly, "Correlation of the Particle Size Distribution with Process Parameters for a Gas-Metal Atomizer," Proceedings of the 1994 Powder Metallurgy World Congress and Exhibition, I, pp. 391-394, Paris, France (1994).
P. I. Espina, S. A. Osella, S. D. Ridder, F. S. Biancaniello, and G. E. Mattingly, "A Hybrid Model of a Gas-Metal Atomizer and its Application to the Development of a Knowledge-Based Control System," Proc. of the 1994 Powder Metallurgy World Congress and Exhibition, I, pp. 349-352, Paris, France (1994).
P. I. Espina, S. A. Osella, S. D. Ridder, F. S. Biancaniello, and G. E. Mattingly, "The Evolution of Gas-Metal Atomization: From Discrete Jets to Annular Jets via Computational Fluid Mechanics," P/M in Aerospace, Defense and Demanding Applications, ed. F. H. Froes, (Princeton, NJ: MPIF), pp. 101-107 (1993).
P. I. Espina, U. Piomelli and G. E. Mattingly, "A Numerical Investigation of the Compressible Flow Field Produced in an Annular Jet, Close-Coupled, Gas Metal Atomizer," Computational and Numerical Techniques in Powder Metallurgy, ed. D. S. Madan, I. E. Anderson, and W. E. Frazier, (Warrendale, PA: TMS), pp. 41-53 (1993).
S. D. Ridder, S. A. Osella, P. I. Espina and F. S. Biancaniello, "Intelligent Control of Particle Size Distribution During Gas Atomization," Inter. J. of Powder Metall., 28 (2), pp. 133-147 (1992).
S. D. Ridder, S. A. Osella, P. I. Espina and F. S. Biancaniello, "Process Modeling and Control of Inert Gas Atomization", Thermal Structures and Materials for High-Speed Flight, Vol. 140, Progress in Astronautics and Aeronautics, ed. E. A. Thornton, (Washington, DC: AIAA), pp. 499-521 (1992).
P. I. Espina, "An Investigation of the Compressible Flow in a Supersonic Inert Gas Metal Atomizer", M.S. Thesis, Univ. of Maryland, College Park, MD (1991).
S. D. Ridder, S. A. Osella, P. I. Espina and F. S. Biancaniello, "Advanced Sensors and Process Control for Gas Atomization", Advances in Powder Metallurgy, Vol. 5, P/M Materials, (Princeton, NJ: MPIF), pp. 249-262 (1991).
S. A. Osella, S. D. Ridder, F. S. Biancaniello and P. I. Espina, "The Intelligent Control of an Inert Gas Atomization Process", JOM, 43, pp. 18-21 (1991).
S. D. Ridder, S. A. Osella, P. I. Espina and F. S. Biancaniello, "Development of Adaptive Control Strategies For Inert Gas Atomization", Intelligent Processing of Materials, ed. H. P. Wang, (New York, NY: ASME), pp. 79-88 (1990).
S. D. Ridder, S. A. Osella, P. I. Espina and F. S. Biancaniello, "Process Diagnostics, Modeling, and Control for Inert Gas Atomization", Intelligent Processing of Materials, ed. H. N. G. Wadley and W. E. Eckhart, Jr., (Warrendale, PA: TMS), pp. 41-53 (1990).
F. S. Biancaniello, J. J. Conway, P. I. Espina, G. E. Mattingly and S. D. Ridder, "Particle Size Measurement of Inert Gas Atomized Powder", Mat. Sci. Eng., A124, pp. 9-14 (1990).
S. D. Ridder, P. I. Espina and F. S. Biancaniello, "Optimization of Inert Gas Atomization", Physical Chemistry of Powder Metals Production and Processing, ed. W. M. Small, (Warrendale, PA: TMS), pp. 163-173 1989.
S. D. Ridder, F. S. Biancaniello, P. I. Espina and S. A. Miller, "Laser Holographic Imaging of the Two Fluid Atomization Process", Characterization & Diagnostics of Ceramics & Metal Particulate Processing, ed. E. J. Lavernia, H. Henein, and I. Anderson, (Warrendale, PA: TMS), pp. 73-86 (1989).
P. I. Espina, S. D. Ridder, F. S. Biancaniello and G. E. Mattingly, "Aerodynamic Analysis of the Aspiration Phenomena in a Close-Coupled Inert Gas Atomizer", Characterization & Diagnostics of Ceramics & Metal Particulate Processing, ed. E. J. Lavernia, H. Henein, and I. Anderson, (Warrendale, PA: TMS), pp. 49-62 (1989).
F. S. Biancaniello, P. I. Espina,
G. E. Mattingly and S. D. Ridder, "A Flow Visualization Study of Supersonic
Inert Gas Metal Atomization", Mat. Sci. Eng., A119, pp. 159-166 (1989).
| |
