|
Industrial Thermometer Calibration Laboratory The Industrial Thermometer Calibration Laboratory calibrates liquid-in-glass thermometers, industrial platinum resistance thermometers, thermistors, and thermocouples in the temperature range -196 ºC to 550 ºC. Calibrations in this laboratory are made by comparison with a calibrated standard platinum resistance thermometer in stirred liquid baths. Fixed-point measurements at the Ga melting point (29.7646 °C) [for a thermometer with an outer diameter of less than 3.6 mm], the water triple point (0.01 °C) and the ice point (0 °C) are available.
For more information, contact either Dawn Cross at dawn.cross@nist.gov or Gregory Strouse at gregory.strouse@nist.gov |
Last Updated on: 2/25/04
| Contacts Tests and Fees Calibration Uncertainties Industrial Thermometers Low Temperature SPRTs Thermocouples |
| Bibliography Fixed Points Humidity IPRTs ITS 90 Liquid in Glass Meas. Assurance Publications RTP SPRTs SRMs Tempmeko 2001 Thermistors Thermocouples Thermodynamic |
|
Precision Themometry Workshop: ITS 90 Fixed Point Cell Mini Workshop: Liquid In
Glass Thermometer Mini Workshop: |
|
Calibration for RTP |
 |
 |
 |
 |
 |
 |
 |
 |
